Sandblast Stencil for Glass
Quality Sandblast Stencil for Glass specially formulated for sandblasting and etching of glass and wood. They cut cleanly and easily while holding designs of intricate detail.
Sandblasting stencils are vinyl or rubber sheets that are cut out with designs. The cut out stencils are typically used for sandblasting designs into all types of materials such as rock, small stones, brick, metal, wood, or glass. This is also known as engraving, etching, or sandcarving.
You can trace your design on to the surface of these sandmask materials with a pen, pencil, or carbon paper.
The 3.5 mil resist Sandblast Resistance is designed to hold during sandblasting and remove with no transfer of adhesive to the surface. Primarily used as a stencil for light blasting of glass and wood.
The 8 mil sandblast resists is used as a sandblast stencil for medium to heavy blasting of glass and wood.
The 15 mil resist is the thickest sandblast vinyl we carry. You can use it as a stencil for deep carving and stage blasting of glass and wood. Resists are available in white and yellow.
Material | PVC, semihard vinyl chloride |
Thickness | 0.08mm to 1.5mm or customized |
Width | 30cm 60cm 61cm 120cm 122cm etc |
Hardness | Soft |
Length | 15m,30m, 50m or Customize |
Color | mainly yellow and white Green or Customized |
Adhesive | rubber, acrylic, oil-based |
Adhesive strength | 1.47N/18mm |
Tensile strength | 39.2N/18mm |
Elongation | 15% |
Package | Pallets+Carton(customize) |
MOQ | 61m2(each specification) |
ADVANTAGE | PVC sandblasting film with excellent viscosity, is easy to tear, no residue left. It can be used for sand blasting and glass engraving, the light spraying, deep carving, etc. |
Payment term | 30% deposit, balance against the copy of B/L |
Delivery day | 7-15 days after receiving the deposit |