Mirror Chrome

Mirror Chrome Car Wrap is Semi-conformable PVC material with silver coating. Suitable for full car wrapping on smooth or medium curved surfaces. Mirror Chrome Car Wrap Concave and convex surfaces with difficult angles should be wrapped in pieces with 3-5mm overlaps. Mirror Chrome Vinyl Comes with a selection of 11 reflective colors to create a distinctive appearance and improve a car’s aesthetics.

Application: vehicle and motorcycle graphics, vehicle personalization

The thickness of film: 0,11mm

The thickness of film with release liner: 0,29mm

Type of film: Hybrid vinyl film (silver coating) with air release channels

Series: 180 series

Adhesive: Henkel solvent based low initial tack adhesive, white and grey

Release liner: White silicone-coated paper with a double-sided polyethylene coating

Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place

Indoor life: 2 years when followed rules of application and use

Outdoor life: 1-2 years when followed rules of application and use. Durability depends on the surface and climate zone.

Application temperature: from +17°С to +25°С, usage from -30°С to +30°С

Dimensional stability: shrinkage less than 0,20%

Plastification: between 23%-31%

Package: Roll width 152 cm, length 18 m, weight 13 kg

Important note: The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. One need to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, too strong heating. The film may scratch during application, or during a day in and out use. Scratching of the film is not covered by warranty.